Uniflame GAD1321SP Owner's Manual download pdf (Page 6)

LP Gas Outdoor Fireplace Model No. GAD1321SP Series

Installing LP Gas Tank

To operate, you will need (1) precision-filled standard grill LP gas

tank (20#) with external valve threads.

W CAUTION: LP gas tank must be properly

disconnected and removed prior to moving this

outdoor fireplace.

Insert and Secure LP Gas Tank

W WARNING: Make sure LP gas tank valve is closed. Close by turning

valve clockwise.

1. Loosen LP gas tank retainer bolt by turning counter-clockwise.

2. Place precision filled LP gas tank upright into hole in the base of the outdoor fireplace so it

is arranged for vapor withdrawal.

3. Secure tank by turning LP gas tank retainer bolt clockwise.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in the

head of the LP gas tank, head of the regulator valve or in the

head of the burner and burner ports.

Connect regulator/hose assembly to tank by turning knob

clockwise until it stops.

Disconnect LP Gas Tank

Before disconnecting make sure the LP gas tank valve is

“CLOSED.”

Disconnect regulator/hose assembly from LP gas tank by turning

knob counterclockwise until it is loose.

W CAUTION: LP gas tank must be properly

disconnected and removed prior to moving

this outdoor fireplace.

Getting More Propane

Need a tank of gas? One option is to try propane exchange. It’s easy, fast,

safe, and available at tens of thousands of conveniently located retail outlets

nationwide, which are typically open on nights and weekends. You can

purchase a fresh, precision-filled tank or exchange your empty for a fresh,

precision-filled tank. Another option is to have your tank refilled at a refill

station. Be sure to check the hours of operation for the refill station.

20 lb

9 Kg

17.9 in. / 45.5 cm

12.2 in. / 31 cm

Checking for Leaks

W WARNING: Before using this outdoor

fireplace, make sure you have read,

understand and are following all

information provided in the Dangers

and Warnings presented on page 2.

Failure to follow those instructions

can cause death, serious injury or

property damage.

Burner Connections

1. Make sure the regulator valve and hose

connections are securely fastened to the burner

and the tank. If your unit was assembled for

you, visually check the connection between the

burner venturi pipe and orifice. Make sure the

burner venturi pipe fits over the orifice.

W WARNING: Failure to inspect

this connection or follow these

instructions could cause a fire or an

explosion which can cause death,

serious bodily injury, or damage to

property.

2. Please refer to diagram for proper installation.

(Figure 1)

3. If the burner pipe does not rest flush to the

orifice, please contact 1.800.762.1142 for

assistance.

Tank/Gas Line Connection

1. Make 2-3 oz. of leak solution by mixing one part

liquid dishwashing soap with three parts water.

2. Make sure control knobs are in the “OFF

”

position. (Figure 3)

3. Connect LP gas tank per “Installing LP Gas

Tank” section.

4. Turn LP gas tank valve to “OPEN.”

5. Spoon several drops of solution, or use squirt

bottle, at all “X” locations (Figures 1 and 2).

a. If any bubbles appear remove the LP gas tank

and reconnect, making sure the connection

is secure.

b. If you continue to see bubbles after several

attempts, remove the LP gas tank per

“Disconnect LP Gas Tank” instructions, and

contact 1.800.762.1142 for assistance.

c. If no bubbles appear after one minute, wipe

away solution and proceed.

Lighting

W Caution: Keep outdoor gas appliance

area clear and free from combustible

materials, gasoline and other

flammable vapors and liquids.

W Caution: Do not obstruct the flow of

combustion and ventilation air.

W Caution: Check and clean burner/

venturi tubes for insects and insect

nests. A clogged tube can lead to a

fire beneath the outdoor fireplace.

W Caution: Attempting to light the burner with the lid closed may cause

an explosion.

1. Make sure all labels, packaging and protective films have been removed from the outdoor

fireplace.

2. Make sure there are no obstructions of airflow to the burners. Spiders and insects can nest

within and clog the burner / venturi tube at the orifice. A clogged burner tube can lead to a

fire beneath the appliance.

3. Control knob must be in the

(OFF) position. (Figure 3)

4. Clear small area of glass rocks or lava rocks away from the pilot housing.

5. Connect LP gas tank per “Connect LP Gas Tank” instructions.

6. Turn LP gas tank valve to “OPEN.”

7. Push and turn control knob to

(LOW).

8. Press the

(electronic igniter) button and hold for up to 5 seconds to light the pilot.

9. Hold the control knob in for 20 seconds to heat thermocouple.

10. After 20 seconds, release and turn control knob counter-clockwise to igniter burner and

adjust flame to desired height.

11. If ignition does not occur in 5 seconds, turn control knob

(OFF), wait 5 minutes, and

repeat lighting procedure.

Figure 1

LP Gas Valve

with Oriﬁce

LP Gas

Connection

Figure 2

Figure 3

OFF / ARRÊT

Figure 4

Figure 5

1 in. – 11 in.

2.5 cm – 28 cm

Operating Instructions

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Uniflame GAD1321SP Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Barbecues & grills Uniflame GAD1321SP